Hose Mender
Hose Mender is a repair fitting for joining two cut hose ends, extending hose life without replacing the full assembly. The barbed internal tail grips the hose ID, while external clamps provide a pressure-tight seal.
📋 At a Glance
Material: Steel, Brass, or Plastic
Sizes: 1/4" to 2"
Type: Internal barb (insert)
Connection: Barb + external clamp
Reusability: Can be reinstalled on new hose
📌 Where You'll Use It
1. Garden and irrigation hose repair
2. Industrial air and water hose repair
3. Agricultural spray line repair
4. Extension of existing hose runs
🎯 Value & Performance
Repairs a cut or damaged hose in under 2 minutes — no special tools
Reusable — can be transferred to a new hose section
Double-barbed design prevents blow-off under pressure
Costs a fraction of replacing a full hose assembly
🛡️ Trust & Certification
Machined from brass or zinc-plated steel with double-barbed tails. Barb dimensions are controlled to provide 1-2mm interference fit across standard hose IDs. Pressure-tested to 1.5x rated pressure.
Customization & OEM Service
ShengYa supplies Hose Mender to distributors, hose assemblers and OEM equipment builders worldwide. We support full customization on every order:
- Size & specification: non-standard bore, wall thickness, length or pressure rating built to your drawing or sample.
- Material & construction: compound, cover colour, reinforcement and helix options selected to match the conveyed medium.
- Branding: printed or embossed logo, part number and barcode, plus private-label packaging.
- Assembly: cut lengths, fitted couplings, clamps and pre-assembled hose sets ready to install.
- Documentation: material certificate, dimensional and pressure-test reports supplied on request.
Typical MOQ is 500 m (or 500 pcs for fittings) per size for customized production and lower for stocked items. Standard lead time is 15–25 days, and samples are available for evaluation before bulk order.
Frequently Asked Questions
Can a hose mender permanently repair a split hose?
A hose mender is designed to rejoin two hose ends or replace a damaged section, giving a full-bore, leak-free joint that is permanent in normal service. Cut the damaged section out squarely, insert the mender fully and secure each end with the correct clamp. For high-pressure or safety-critical lines we recommend replacing the hose length instead.
What is your minimum order quantity?
For stocked specifications the MOQ is typically 100 m (or 100 pcs for fittings) per size. For customized production the usual MOQ is 500 m or 500 pcs per size, depending on material and tooling.
Can you produce to my own specification or brand?
Yes. We regularly produce to customer drawings and samples, including non-standard sizes, compounds and cover colours, and we can print or emboss your logo and supply private-label packaging.
What is the lead time, and can I get samples first?
Stocked items normally ship in 7–15 days and customized production in 15–25 days. Samples are available so you can test the product in your application before placing a bulk order.
